The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Viking Electronics VK-E-10A Intercom Facia

(Inc. VAT)
(Ex. VAT)
Write a Review

Model Number: VK-E.10A
Unit of Measure: Each
Product Description: The E-10A is a telephone line powered door entry phone designed to provide two-way handsfree communication. When the “Call” button is pressed, the E-10A will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect.
The E-10A can be used with a Viking K-1900-5 or K1900-30 dialer, or connected directly to a CO line or analog PABX / KSU station when programmed as a ringdown circuit. If a line or station is not available, a Viking DLE-200B ringdown circuit can be used. One to four E-10A speaker phones can share an existing entry phone line in a house or small business when used with a Viking C-200, C-250 or C-2000B Entry Phone Controller.


  • Alternate action call button to place or cancel a call
  • Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
  • Telephone line powered
  • Adjustable microphone and speaker volume
  • Programmable maximum call length
  • Selectable auto-answer feature allows remote monitoring
  • Two-way handsfree communication
  • Programmable VOX (mic / speaker) switching speed
  • Vandal resistant black powder painted aluminum faceplate with heavy duty 316 stainless steel call button and mounting gasket
  • Flush mount using the included rough-in box or surface mount using a VE-5×5 Surface Mount Box (DOD 424)


  • Power: Telephone line powered (18VDC / 20mA minimum)
  • Overall Dimensions: 5? x 5? x 2.25? (127mm x 127mm x 57.2mm)
  • Rough-In Box Dimensions: 4? x 4? x 2.15? (102mm x 102mm x 55mm)
  • Shipping Weight: 2 lbs (0.91 kg)
  • Operating Temperature: -30°F to 150°F (-34°C to 65°C)
  • Humidity: 5% to 95% non-condensing
  • Maximum Speaker Volume: 70dB SPL @ 1m
  • Ring Voltage: 25VRMS minimum
  • Minimum CPC Disconnect Time: 300ms
  • REN: 0.8A
  • Connections: (2) Gel-filled butt connectors

Item Dimensions:

  • Weight: 0.55 kg

Condition: New/Other. Has been in storage. Comes in original packaging. Original packaging only showing signs of wear.